Reman Howo 400 12 Wheel Tipper Truck U Shape

Reman 12 Wheel Tipper Truck Description

• REMAN ROAD reman 12 wheel tipper truck balances procurement cost and long-term operational performance.
• Remanufacturing Howo tippers avoids the high purchase price of brand-new dump trucks and unpredictable failure risks of used vehicles.
• Optimized for cyclic loading and dumping on off-road sites, remanufacturing Howo tippers delivers reliable bulk material transport for international construction and mining contractors.

Full Parameter Table

• Model: Reman 12 Wheel Tipper Truck Howo 400
• Drive Form: 8×4, high load-bearing capacity, built for bulk material hauling on mine & construction off-road terrain
• Engine: Remanufactured diesel engine, full disassembly overhaul, piston & sealing parts renewed
• Gearbox: Remanufactured manual gearbox, gear wear inspection, lubrication system replaced
• Chassis Frame: Crack‑detected, stress‑relieved, welding reinforcement where needed
• Axles & Suspension: Heavy‑duty rear axles remanufactured, leaf spring inspected & replaced if fatigued
• Brake System: Full WABCO‑standard brake overhaul, all worn friction parts updated
• Hydraulic System: Brand‑new hydraulic pump, oil cylinder and pipeline, leak‑tested
• Dump Body (Customizable): Reinforced high‑strength steel tipper box, sand‑blasted & new blue anti‑rust paint
• Tire Specification: Well‑conditioned heavy‑off‑road tyres, optional new tyre upgrade
• Fuel Tank: 400L aluminum alloy fuel tank, all pipelines fully replaced
• Cabin Assembly: Classic HOWO cabin, interior refurbishment, full circuit overhaul and complete electrical system debugging

Truck Remanufacturing Work

• Base Vehicle Audit: Check frame integrity and prior working records, filter out units with severe crash or permanent structural deformation.
• Dismantle Core Assemblies: Remove engine, transmission, axles and hydraulic groups; keep intact cabin and cargo box for targeted inspection.
• Non-destructive Crack Detection: Scan chassis and cargo box weld seams to find hidden metal fatigue and micro cracks, then carry out reinforcement.
• Renew Critical Wear Parts: Swap out seals, bearings, brake parts and hydraulic hoses. Overhaul powertrain to recover original power output.
• Assembly & System Debugging: Reassemble all components, tune hydraulic lifting speed and brake balance to adapt to cyclic mine dumping work.
• Load Simulation Validation: Simulate repeated full-load lifting and downhill heavy braking to eliminate leakage and safety risks.
• Final Inspection & Handover: Complete exterior finishing and final check. Package all test logs and replacement lists to hand over with the truck.

Cargo Box Reinforcement & Wear Protection

• Full inspection of cargo box bottom plate, side panels and all welding seams for cracks, deformation and abrasion.
• Worn liner plates are replaced with high-hardness wear-resistant steel, optimized for repeated rock and ore impact.
• Stress-concentrated welding joints are reinforced; deformed panels are corrected or replaced.
• Hinge and pivot points of the tipper box are inspected, repaired or renewed to avoid fracture under heavy impact.
• Anti-corrosion primer and heavy-duty topcoat are applied to resist rust and abrasion in dusty mine environments.

Heavy Load Bench Validation & Performance Recording

• Rebuilt engine runs continuous rated-load bench testing to check power, torque, oil pressure and temperature stability.
• Hydraulic system undergoes long-cycle lifting tests to verify pressure retention and anti-leakage performance.
• Axle bench test checks differential heating, vibration and oil leakage under simulated maximum payload.
• All bench test data is recorded and stored as part of the reman delivery document package.
• Any assembly failing bench validation will be reworked and retested before final vehicle assembly.

RFQ

• Q1: Which components must be replaced with brand-new parts in your truck remanufacturing work for HOWO dump trucks?
  A1: All sealing kits, bearings, piston rings, brake friction parts, gaskets and aging rubber hoses are mandatory new replacements. These consumable fatigue components will never be reused.
• Q2: How do you validate the working performance of the rebuilt engine after remanufacturing?
  A2: Each rebuilt engine runs multi-hour full-load bench testing. We check power output, torque, oil pressure, temperature and noise level. It will only be approved once all indicators match OEM specifications.
• Q3: Does your reman overhaul service cover the cargo box of this remanufacturing Howo tippers?
  A3: Yes. We inspect all welding seams, reinforce high-impact joints, replace worn liner plates and test box structural strength to withstand rock and aggregate impact in quarry sites.
• Q4: What simulated working condition testing will this reman 12 wheel tipper truck go through?
  A4: We simulate high-temperature, dusty and downhill heavy-load operating conditions. It verifies cooling efficiency, sealing integrity and braking stability to adapt to harsh mine working environments.
• Q5: What maintenance guidance will be delivered with the reman 12 wheel tipper truck?
  A5: We supply a customized preventive maintenance schedule plus a list of recommended high-wear spare parts, helping your on-site workshop reduce the risk of unplanned breakdowns.
• Q6: What warranty coverage do you offer for manufacturing defects of rebuilt core assemblies after shipment?
  A6: Our warranty covers manufacturing defects of reman-rebuilt engine, gearbox and axles within agreed terms. We provide remote technical consultation and preferential spare parts support for covered repair cases.